Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.Inquiry
Furnace is used for continuous pre-oxidation treatment under controlled atmosphere of PAN based, asphalt based, viscose based carbon fiber and its felt material.
1.Using special hot air circulation and air distribution structure, the temperature uniformity is ≤±1.5℃/m, air flow uniformity is ≤±20%;
2.Using module section manufacture technology, it can connect together freely in accordance with the production capacity;
3.It can be designed multi-layer structure to reduce the floor space requires;
4.Using auto material feeding and rolling discharge device, operate easily.
Optional Configuration of Continuous Pre-oxidation Furnace
1.Furnace structure: single layer/multi-layer
2.Hot air circulation type: top and bottom/left and right/inlet from the rear end top, return from the entrance end side
3.Hot air distribution: concentration heating, evenly distribution/separate heating, evenly distribution
4.HMI: simulation screen/touch screen/industrial compute
6.Temperature controller: SHIMADEN/ Eurotherm
7.Temperature measuring: thermocouple/ thermo-meter
Specifications of Pusher Type Purification Furnace
|Furnace Hearth Width||220||1300||1800|
|Section Temperature uniformity(℃)||Cross-section:±2℃|
|Gas Speed||0.5-3 Nm/s(Adjustable)|
|The above parameters can be adjusted to the process requirements, they are not as acceptance standard, the detail spec. will be stated in the technical proposal and agreements.|
Founded in 1999, ACME (Advanced Corporation for Materials & Equipments) is located in Muyun Industrial Zone, with an area of 100,000 m2. ACME is a high-tech enterprise specialized in manufacture of industry heating equipment for new material and energy.